Incoming light in the parallel (
s) polarization sees a different effective
index of refraction than light in the perpendicular (
p) polarization, and is thus
refracted at a different angle.
A
calcite crystal laid upon a graph paper with blue lines showing the double refraction
Doubly refracted image as seen through a calcite crystal, seen through a rotating polarizing filter illustrating the opposite polarization states of the two images.
Birefringence is the optical property of a material having a refractive index that depends on the polarization and propagation direction of light.^{[1]} These optically anisotropic materials are said to be birefringent (or birefractive). The birefringence is often quantified as the maximum difference between refractive indices exhibited by the material. Crystals with asymmetric crystal structures are often birefringent, as are plastics under mechanical stress.
Birefringence is responsible for the phenomenon of double refraction whereby a ray of light, when incident upon a birefringent material, is split by polarization into two rays taking slightly different paths. This effect was first described by the Danish scientist Rasmus Bartholin in 1669, who observed it^{[2]} in calcite, a crystal having one of the strongest birefringences. However it was not until the 19th century that AugustinJean Fresnel described the phenomenon in terms of polarization, understanding light as a wave with field components in transverse polarizations (perpendicular to the direction of the wave vector).
Contents

Explanation 1

Uniaxial materials 1.1

Biaxial materials 1.2

Double refraction 1.3

Terminology 2

Fast and slow rays 2.1

Positive or negative 2.2

Sources of optical birefringence 3

Common birefringent materials 4

Measurement 5

Applications 6

Medicine 6.1

Stress induced birefringence 6.2

Other cases of birefringence 6.3

Theory 7

See also 8

Notes 9

References 10

External links 11
Explanation
A mathematical description of wave propagation in a birefringent medium is presented below. Following is a qualitative explanation of the phenomenon
Uniaxial materials
The simplest (and most common) type of birefringence is described as uniaxial, meaning that there is a single direction governing the optical anisotropy whereas all directions perpendicular to it (or at a given angle to it) are optically equivalent. Thus rotating the material around this axis does not change its optical behavior. This special direction is known as the optic axis of the material. Light whose polarization is perpendicular to the optic axis is governed by a refractive index n_{o} (for "ordinary"). Light whose polarization is in the direction of the optic axis sees an optical index n_{e} (for "extraordinary"). For any ray direction there will be a polarization direction perpendicular to the optic axis, and this is called an ordinary ray. However, for most ray directions the other polarization direction will be partly in the direction of the optic axis, and this is called an extraordinary ray. The ordinary ray will always experience a refractive index of n_{o}, whereas the refractive index of the extraordinary ray will be in between n_{o} and n_{e}, depending on the ray direction as described by the index ellipsoid. The magnitude of the difference is quantified by the birefringence:

\Delta n=n_en_o\,.
The propagation (as well as reflection coefficient) of the ordinary ray is simply described by n_{o} as if there were no birefringence involved. However the extraordinary ray, as its name suggests, propagates unlike any wave in a homogenous optical material. Its refraction (and reflection) at a surface can be understood using the effective refractive index (a value in between n_{o} and n_{e}). However it is in fact an inhomogeneous wave whose power flow (given by the Poynting vector) is not exactly in the direction of the wave vector. This causes an additional shift in that beam, even when launched at normal incidence, as is popularly observed using a crystal of calcite as photographed above. Rotating the calcite crystal will cause one of the two images, that of the extraordinary ray, to rotate slightly around that of the ordinary ray which remains fixed.
When the light propagates either along or orthogonal to the optic axis, such a lateral shift does not occur. In the first case, both polarizations see the same effective refractive index, so there is no extraordinary ray. In the second case the extraordinary ray propagates at a different phase velocity (corresponding to n_{e}) but is not an inhomogeneous wave. A crystal with its optic axis in this orientation, parallel to the optical surface, may be used to create a waveplate, in which there is no distortion of the image but an intentional modification of the state of polarization of the incident wave. For instance, a quarterwave plate is commonly used to create circular polarization from a linearly polarized source.
Biaxial materials
The case of socalled biaxial crystals is substantially more complex.^{[3]} These are characterized by three refractive indices corresponding to three principal axes of the crystal. For most ray directions, both polarizations would be classified as extraordinary rays but with different effective refractive indices. Being extraordinary waves, however, the direction of power flow is not identical to the direction of the wave vector in either case.
The two refractive indices can be determined using the index ellipsoids for given directions of the polarization. Note that for biaxial crystals the index ellipsoid will not be an ellipsoid of revolution ("spheroid") but is described by three unequal principle refractive indices n_{α}, n_{β} and n_{γ}. Thus there is no axis around which a rotation leaves the optical properties invariant (as there is with uniaxial crystals whose index ellipsoid is a spheroid).
Double refraction
When an arbitrary beam of light strikes the surface of a birefringent material, the polarizations corresponding to the ordinary and extraordinary rays generally take somewhat different paths. Unpolarized light consists of equal amounts of energy in any two orthogonal polarizations, and even polarized light (except in special cases) will have some energy in each of these polarizations. According to Snell's law of refraction, the angle of refraction will be governed by the effective refractive index which is different between these two polarizations. This is clearly seen, for instance, in the Wollaston prism which is designed to separate incoming light into two linear polarizations using a birefringent material such as calcite.
The different angles of refraction for the two polarization components are shown in the figure at the top of the page, with the optic axis along the surface (and perpendicular to the plane of incidence), so that the angle of refraction is different for the p polarization (the "ordinary ray" in this case, having its polarization perpendicular to the optic axis) and the s polarization (the "extraordinary ray" with a polarization component along the optic axis). In addition, a distinct form of double refraction occurs in cases where the optic axis is not along the refracting surface (nor exactly normal to it); in this case the electric polarization of the birefringent material is not exactly in the direction of the wave's electric field for the extraordinary ray. The direction of power flow (given by the Poynting vector) for this inhomogenous wave is at a finite angle from the direction of the wave vector resulting in an additional separation between these beams. So even in the case of normal incidence, where the angle of refraction is zero (according to Snell's law, regardless of effective index of refraction), the energy of the extraordinary ray may be propagated at an angle. This is commonly observed using a piece of calcite cut appropriately with respect to its optic axis, placed above a paper with writing, as in the above two photographs.
Terminology
Much of the work involving polarization preceded the understanding of light as a transverse electromagnetic wave, and this has affected some terminology in use. Isotropic materials have symmetry in all directions and the refractive index is the same for any polarization direction. An anisotropic material is called "birefringent" because it will generally refract a single incoming ray in two directions, which we now understand correspond to the two different polarizations. This is true of either a uniaxial or biaxial material.
In a uniaxial material, one ray behaves according to the normal law of refraction (corresponding to the ordinary refractive index), so an incoming ray at normal incidence remains normal to the refracting surface. However, as explained above, the other polarization can be deviated from normal incidence, which cannot be described using the law of refraction. This thus became known as the extraordinary ray. The terms "ordinary" and "extraordinary" are still applied to the polarization components perpendicular to and not perpendicular to the optic axis respectively, even in cases where no double refraction is involved.
A material is termed uniaxial when it has a single direction of symmetry in its optical behavior, which we term the optic axis. It also happens to be the axis of symmetry of the index ellipsoid (a spheroid in this case). The index ellipsoid could still be described according to the refractive indices, n_{α}, n_{β} and n_{γ}, along three coordinate axes, however in this case two are equal. So if n_{α} = n_{β} corresponding to the x and y axes, then the extraordinary index is n_{γ} corresponding to the z axis, which is also called the optic axis in this case.
However materials in which all three refractive indices are different are termed biaxial and the origin of this term is more complicated and frequently misunderstood. In a uniaxial crystal, different polarization components of a beam will travel at different phase velocities, except for rays in the direction of what we call the optic axis. Thus the optic axis has the particular property that rays in that direction do not exhibit birefringence, with all polarizations in such a beam experiencing the same index of refraction. It is very different when the three principal refractive indices are all different; then an incoming ray in any of those principle directions will still encounter two different refractive indices. But it turns out that there are two special directions (at an angle to all of the 3 axes) where the refractive indices for different polarizations are again equal. For this reason, these crystals were designated as biaxial, with the two "axes" in this case referring to ray directions in which propagation does not experience birefringence.
Fast and slow rays
In a birefringent material, a wave consists of two polarization components which generally are governed by different effective refractive indices. The socalled slow ray is the component for which the material has the higher effective refractive index (slower phase velocity), while the fast ray is the one with a lower effective refractive index. When a beam is incident on such a material from air (or any material with a lower refractive index), the slow ray is thus refracted more towards the normal than the fast ray. In the figure at the top of the page, it can be seen that refracted ray with s polarization in the direction of the optic axis (thus the extraordinary ray) is the slow ray in this case.
Using a thin slab of that material at normal incidence, one would implement a waveplate. In this case there is essentially no spatial separation between the polarizations, however the phase of the wave in the parallel polarization (the slow ray) will be retarded with respect to the perpendicular polarization. These directions are thus known as the slow axis and fast axis of the waveplate.
Positive or negative
Uniaxial birefringence is classified as positive when the extraordinary index of refraction n_{e} is greater than the ordinary index n_{o}. Negative birefringence means that Δn = n_{e}  n_{o} is less than zero.^{[4]} In other words, the polarization of the fast (or slow) wave is perpendicular to the optic axis when the birefringence of the crystal is positive (or negative, respectively). In the case of biaxial crystals, all three of the principal axes have different refractive indices so this designation does not apply. But for any defined ray direction one can just as well designate the fast and slow ray polarizations.
Sources of optical birefringence
While birefringence is usually obtained using an anisotropic crystal, it can result from an optically isotropic material in a few ways:

Stress birefringence results when isotropic materials are stressed or deformed such that the isotropy is lost in one direction (i.e., stretched or bent).

Intrinsic birefringence, whereby the material has more than one chemical group with differing refractive indices that have some preferential order that results in optical rotation.

Form birefringence, whereby structure elements, such as rods or spheres having one refractive index, are suspended in a media with a second refractive index.

By the Kerr effect, whereby an applied electric field induces birefringence at optical frequencies through the effect of nonlinear optics;

By the Faraday effect, where a magnetic field causes some materials to become circularly birefringent (having slightly different indices of refraction for left and right handed circular polarizations), making the material optically active until the field is removed;

By the self or forced alignment into thin films of amphiphilic molecules such as lipids, some surfactants or liquid crystals
Common birefringent materials
The bestcharacterized birefringent materials are crystals. Due to their specific crystal structures their refractive indices are well defined. Depending on the symmetry of a crystal structure (as determined by one of the 219 possible crystallographic space groups), crystals in that group may be forced to be isotropic (not birefringent), to have uniaxial symmetry, or neither in which case it is a biaxial crystal. The crystal structures permitting uniaxial and biaxial birefringence are noted in the two tables, below, listing the two or three principle refractive indices (at wavelength 590 nm) of some better known crystals.^{[5]}
Many plastics are birefringent, because their molecules are 'frozen' in a stretched conformation when the plastic is molded or extruded.^{[6]} For example, ordinary cellophane is birefringent. Polarizers are routinely used to detect stress in plastics such as polystyrene and polycarbonate.
Cotton fiber is birefringent because of high levels of cellulosic material in the fiber's secondary cell wall.
Polarized light microscopy is commonly used in biological tissue, as many biological materials are birefringent. Collagen, found in cartilage, tendon, bone, corneas, and several other areas in the body, is birefringent and commonly studied with polarized light microscopy.^{[7]} Some proteins are also birefringent, exhibiting form birefringence.^{[8]}
Inevitable manufacturing imperfections in optical fiber leads to birefringence which is one cause of pulse broadening in fiberoptic communications. Such imperfections can be geometrical (lack of circular symmetry), due to stress applied to the optical fiber, and/or due to bending of the fiber. Birefringence is intentionally introduced (for instance, by making the crosssection elliptical) in order to produce polarizationmaintaining optical fibers.
In addition to anisotropy in the electric polarizability (electric susceptibility), anisotropy in the magnetic polarizability (magnetic permeability) can also cause birefringence. However at optical frequencies, values of magnetic permeability for natural materials are not measurably different from µ_{0} so this is not a source of optical birefringence in practice.
Measurement
Birefringence and other polarization based optical effects (such as optical rotation and linear or circular dichroism) can be measured by measuring the changes in the polarization of light passing through the material. These measurements are known as polarimetry. Polarized light microscopes, which contain two polarizers that are at 90 degrees to each other on either side of the sample, are used to visualize birefringence. The addition of quarter wave plates permit examination of circularly polarized light. Birefringence measurements have been made with phasemodulated systems for examining the transient flow behavior of fluids.^{[9]}^{[10]}
Birefringence of lipid bilayers can be measured using dual polarisation interferometry. This provides a measure of the degree of order within these fluid layers and how this order is disrupted when the layer interacts with other biomolecules.
Applications
Reflective twisted nematic
liquid crystal display. Light reflected by surface (6) (or coming from a
backlight) is horizontally polarized (5) and passes through the liquid crystal modulator (3) sandwiched in between transparent layers (2,4) containing electrodes. Horizontally polarized light is blocked by the vertically oriented polarizer (1) except where its polarization has been rotated by the liquid crystal (3), appearing bright to the viewer
Birefringence is used in many optical devices. Liquid crystal displays, the most common sort of flat panel display, cause their pixels to become lighter or darker through rotation of the polarization (circular birefringence) of linearly polarized light as viewed through a sheet polarizer at the screen's surface. Similarly, light modulators modulate the intensity of light through electrically induced birefringence of polarized light followed by a polarizer. The Lyot filter is a specialized narrowband spectral filter employing the wavelength dependence of birefringence. Wave plates are thin birefringent sheets widely used in certain optical equipment for modifying the polarization state of light passing through it.
Birefringence also plays an important role in second harmonic generation and other nonlinear optical components, as the crystals used for this purpose are almost always birefringent. By adjusting the angle of incidence, the effective refractive index of the extraordinary ray can be tuned in order to achieve phase matching which is required for efficient operation of these devices.
Medicine
Birefringence is utilized in medical diagnostics. One powerful accessory used with optical microscopes is a pair of crossed polarizing filters. Light from the source is polarized in the X direction after passing through the first polarizer, but above the specimen is a polarizer (a socalled analyzer) oriented in the Y direction. Therefore, no light from the source will be accepted by the analyzer, and the field will appear dark. However areas of the sample possessing birefringence will generally couple some of the X polarized light into the Y polarization; these areas will then appear bright against the dark background. Modifications to this basic principle can differentiate between positive and negative birefringence.
Urate crystals, with the crystals with their long axis seen as horizontal in this view being parallel to that of a red compensator filter. These appear as yellow, and are thereby of negative birefringence.
For instance, needle aspiration of fluid from a gouty joint will reveal negatively birefringent monosodium urate crystals. Calcium pyrophosphate crystals, in contrast, show weak positive birefringence.^{[11]} Urate crystals appear yellow and calcium pyrophosphate crystals appear blue when their long axes are aligned parallel to that of a red compensator filter,^{[12]} or a crystal of known birefringence is added to the sample for comparison.
Birefringence can be observed in amyloid plaques such as are found in the brains of Alzheimer's patients when stained with a dye such as Congo Red. Modified proteins such as immunoglobulin light chains abnormally accumulate between cells, forming fibrils. Multiple folds of these fibers line up and take on a betapleated sheet conformation. Congo red dye intercalates between the folds and, when observed under polarized light, causes birefringence.
In ophthalmology, binocular retinal birefringence screening of the Henle fibers (photoreceptor axons that go radially outward from the fovea) provides a reliable detection of strabismus and possibly also of anisometropic amblyopia.^{[13]} Furthermore, scanning laser polarimetry utilises the birefringence of the optic nerve fibre layer to indirectly quantify its thickness, which is of use in the assessment and monitoring of glaucoma.
Birefringence characteristics in sperm heads allow for the selection of spermatozoa for intracytoplasmic sperm injection.^{[14]} Likewise, zona imaging uses birefringence on oocytes to select the ones with highest chances of successful pregnancy.^{[15]} Birefringence of particles biopsied from pulmonary nodules indicates silicosis.
Stress induced birefringence
Isotropic solids do not exhibit birefringence. However, when they are under mechanical stress, birefringence results. The stress can be applied externally or is "frozen in" after a birefringent plastic ware is cooled after it is manufactured using injection molding. When such a sample is placed between two crossed polarizers, colour patterns can be observed, because polarization of a light ray is rotated after passing through a birefingent material and the amount of rotation is dependent on wavelength. The experimental method called photoelasticity used for analyzing stress distribution in solids is based on the same principle.
Other cases of birefringence
Birefringence is observed in anisotropic elastic materials. In these materials, the two polarizations split according to their effective refractive indices which are also sensitive to stress.
The study of birefringence in shear waves traveling through the solid earth (the earth's liquid core does not support shear waves) is widely used in seismology.
Birefringence is widely used in mineralogy to identify rocks, minerals, and gemstones.
Birefringent
rutile observed in different polarizations using a rotating polarizer (or
analyzer)
Theory
In an isotropic medium (including free space) the socalled electric displacement (D) is just proportional to the electric field (E) according to \mathbf D = \epsilon \, \mathbf E \, where the material's permittivity ε is just a scalar (and equal to the square of the index of refraction n times ε_{0}). However, in an anisotropic material exhibiting birefringence, the relationship between D and E must now be described using a tensor equation:

\mathbf D = \epsilon \, \mathbf E \, .
where ε is now a 3x3 permittivity tensor. We assume linearity and no magnetic permeability in the medium: \mu= \mu_0. The electric field of a plane wave of angular frequency ω can be written in the general form:
\mathbf{E=E_0}\exp \left[i(\mathbf{k \cdot r}\omega t)\right] \, (2)
where r is the position vector, t is time, and E_{0} is a vector describing the electric field at r=0, t=0. Then we shall find the possible wave vectors k. By combining Maxwell's equations for \nabla \times E and \nabla \times H, we can eliminate H =B/ \mu_0 to obtain:
\nabla \times \nabla \times \mathbf{E}= \mu_0 \frac{\part^2 \mathbf{D} }{\partial t^2} (3a)
With no free charges, Maxwell's equation for the divergence of D vanishes:
\nabla \cdot \mathbf{D} =0 (3b)
We can apply the vector identity:

\nabla \times \left( \nabla \times \mathbf{A} \right) = \nabla(\nabla \cdot \mathbf{A})  \nabla^{2}\mathbf{A}
to the left hand side of eqn. 3a, and use the spatial dependence in which each differentiation in x (for instance) results in multiplication by i k_x to find:

 \nabla \times \nabla \times \mathbf{E} = \mathbf{(k \cdot E) k}  (\mathbf{k} \cdot \mathbf{k}) \mathbf{E} .
The right hand side of eqn. 3a can be expressed in terms of E through application of the permitivity tensor ε and noting that differentiation in time results in multiplication by i \omega, eqn. 3a then becomes:
(\mathbf{k}\cdot\mathbf{k})\mathbf{E} + \mathbf{(k \cdot E) k}= \mu_0 \omega^2 (\mathbf{\epsilon} \, \mathbf{E}) (4a)
Applying the differentiation rule to eqn. 3b we find:
\mathbf{k} \cdot \mathbf{D} =0 (4b)
Eqn. 4b indicates that \mathbf D is orthogonal to the direction of the wavevector k, even though that is no longer generally true for \mathbf E as would be the case in an isotropic medium. Eqn. 4b will not be needed for the further steps in the following derivation.
Finding the allowed values of k for a given ω is easiest done by using Cartesian coordinates with the x, y and z axes chosen in the directions of the symmetry axes of the crystal (or simply choosing z in the direction of the optic axis of a uniaxial crystal), resulting in a diagonal matrix for the permitivity tensor ε:
\mathbf{\epsilon}= \epsilon_0 \begin{bmatrix} n_x^2 & 0 & 0 \\ 0& n_y^2 & 0 \\ 0& 0& n_z^2 \end{bmatrix} \, (4c)
where the diagonal values are squares of the refractive indices for polarizations along the three principal axes x, y and z. With ε in this form, and substituting in the speed of light c using c = 1/ \sqrt{\mu_0 \epsilon_0}, eqn. 4a becomes
\left(k_x^2k_y^2k_z^2 \right)E_x + k_x^2 E_x + k_xk_yE_y + k_xk_zE_z = \frac{\omega^2n_x^2}{c^2} E_x (5a)
where E_{x}, E_{y}, E_{z} are the components of E (at any given position in space and time) and k_{x}, k_{y} and k_{z} are the components of k. Rearranging, we can write (and similarly for the y and z components of eqn. 4a):
\left(k_y^2k_z^2+\frac{\omega^2n_x^2}{c^2}\right)E_x + k_xk_yE_y + k_xk_zE_z =0 (5b)
k_xk_yE_x + \left(k_x^2k_z^2+\frac{\omega^2n_y^2}{c^2}\right)E_y + k_yk_zE_z =0 (5c)
k_xk_zE_x + k_yk_zE_y + \left(k_x^2k_y^2+\frac{\omega^2n_z^2}{c^2}\right)E_z =0 (5d)
This is a set of linear equations in E_{x}, E_{y}, E_{z}, so it can have a nontrivial solution (that is, one other than E=0) as long as the following determinant is zero:
\begin{vmatrix} \left(k_y^2k_z^2+\frac{\omega^2n_x^2}{c^2}\right) & k_xk_y & k_xk_z \\ k_xk_y & \left(k_x^2k_z^2+\frac{\omega^2n_y^2}{c^2}\right) & k_yk_z \\ k_xk_z & k_yk_z & \left(k_x^2k_y^2+\frac{\omega^2n_z^2}{c^2}\right) \end{vmatrix} =0\, (6)
Evaluating the determinant of eqn (6), and rearranging the terms, we obtain

\frac{\omega^4}{c^4}  \frac{\omega^2}{c^2}\left(\frac{k_x^2+k_y^2}{n_z^2}+\frac{k_x^2+k_z^2}{n_y^2}+\frac{k_y^2+k_z^2}{n_x^2}\right) +

\left(\frac{k_x^2}{n_y^2n_z^2}+\frac{k_y^2}{n_x^2n_z^2}+\frac{k_z^2}{n_x^2n_y^2}\right)(k_x^2+k_y^2+k_z^2)=0
In the case of a uniaxial material, choosing the optic axis to be in the z direction so that n_{x}=n_{y}=n_{o} and n_{z}=n_{e}, this expression can be factored into
\left(\frac{k_x^2}{n_o^2}+\frac{k_y^2}{n_o^2}+\frac{k_z^2}{n_o^2} \frac{\omega^2}{c^2}\right)\left(\frac{k_x^2}{n_e^2}+\frac{k_y^2}{n_e^2}+\frac{k_z^2}{n_o^2} \frac{\omega^2}{c^2}\right)=0\,. (8)
Setting either of the factors in equation (8) to zero will define an ellipsoidal surface^{[note 1]} in the space of wave vectors k that are allowed for a given ω. The first factor being zero defines a sphere; this is the solution for "ordinary rays", in which the effective refractive index is exactly n_{o} regardless of the direction of k. The second defines a spheroid symmetric about the z axis. This solution corresponds to the "extraordinary rays" in which the effective refractive index is in between n_{o} and n_{e}, depending on the direction of k. Therefore, for any arbitrary direction of propagation (other than in the direction of the optic axis), two distinct wavevectors k are allowed corresponding to the polarizations of the ordinary and extraordinary rays.
For a biaxial material a similar but more complicated condition on the two waves can be described;^{[16]} the allowed k vectors in a specified direction now lie on one of two ellipsoids. By inspection one can see that eqn. 6 is generally satisfied for two positive values of ω. Or for a specified optical frequency ω and direction normal to the wavefronts k/k, it is satisfied for two wavenumbers (propagation constants) k (and thus effective refractive indices) corresponding to the propagation of two linear polarizations in that direction.
When those two propagation constants are equal then the effective refractive index is independent of polarization, and there is consequently no birefringence encountered by a wave traveling in that particular direction. For a uniaxial crystal, this is the optic axis, the z direction according to the above construction. But when all three refractive indices (or permittivities), n_{x}, n_{y} and n_{z} are distinct, it can be shown that there are exactly two such directions (where the two ellipsoids intersect); these directions are not at all obvious and do not lie along any of the three principal axes (x, y, and z according to the above convention). Historically that accounts for the use of the term "biaxial" for such crystals, as the existence of exactly two such special directions (considered "axes") was discovered well before polarization and birefringence were understood physically. However these two special directions are generally not of particular interest; biaxial crystals are rather specified by their three refractive indices corresponding to the three axes of symmetry.
A general state of polarization launched into the medium can always be decomposed into two waves, one in each of those two polarizations, which will then propagate with different wavenumbers k. Applying the different phase of propagation to those two waves over a specified propagation distance will result in a generally different net polarization state at that point; this is the principle of the waveplate for instance. However, when you have a wave launched into a birefringent material at nonnormal incidence, the problem is yet more complicated since the two polarization components will now not only have distinct wavenumbers but the k vectors will not even be in exactly the same direction (see figure at the top of the page). In this case the two k vectors are rather solutions of eqn. 6 constrained by the boundary condition which requires that the components of the two transmitted waves' k vectors, and the k vector of the incident wave, as projected onto the surface of the interface must all be identical.
See also
Notes
References

^

^ See:

Erasmus Bartholin, Experimenta crystalli islandici disdiaclastici quibus mira & infolita refractio detegitur [Experiments on birefringent Icelandic crystal through which is detected a remarkable and unique refraction] (Copenhagen, Denmark: Daniel Paulli, 1669).

Erasmus Bartholin (January 1, 1670) "An account of sundry experiments made and communicated by that learn'd mathematician, Dr. Erasmus Bartholin, upon a chrystallike body, sent to him out of Island," Philosophical Transactions of the Royal Society of London, 5 : 20412048.

^ Landau, L. D., and Lifshitz, E. M., Electrodynamics of Continuous Media, Vol. 8 of the Course of Theoretical Physics 1960 (Pergamon Press), §79

^ Brad Amos. Birefringence for facetors I : what is birefringence? First published in StoneChat, the Journal of the UK Facet Cutter's Guild. January–March. edition 2005

^ ^{a} ^{b} ^{c}

^ The Use of Birefringence for Predicting the Stiffness of Injection Molded Polycarbonate Discs

^ M. Wolman, F.H. Kasten, "Polarized light microscopy in the study of the molecular structure of collagen and reticulin," Histochemistry (1986), 85:4149

^ Sano, Y. "Optical anistropy of bovine serum albumin," J. Colliod Int. Sci., 124: 403407 (1988)

^ Frattini, P., Fuller, G., "A note on phasemodulated flow birefringence: a promising rheooptical method,' J. Rheol., 28: 61 (1984)

^ Doyle, P., Shaqfeh, E.S.G., Spiegelberg, S.H., McKinley, G.H., "Relaxation of dilute polymer solutions following extensional flow," J. NonNewtonian Fluid Mech., 86:79110 (1998).

^

^ The Approach to the Painful Joint Workup Author: Alan N Baer; Chief Editor: Herbert S Diamond. Updated: Nov 22, 2010

^

^

^

^ Born M, and Wolf E, Principles of Optics, 7th Ed. 1999 (Cambridge University Press), §15.3.3
External links

Stress Analysis Apparatus (based on Birefringence theory)

http://www.olympusmicro.com/primer/lightandcolor/birefringence.html

Video of stress birefringence in Polymethylmethacrylate (PMMA or Plexiglas).

Artist Austine Wood Comarow employs birefringence to create kinetic figurative images.


The Birefringence of Thin Ice (Tom Wagner, photographer)
This article was sourced from Creative Commons AttributionShareAlike License; additional terms may apply. World Heritage Encyclopedia content is assembled from numerous content providers, Open Access Publishing, and in compliance with The Fair Access to Science and Technology Research Act (FASTR), Wikimedia Foundation, Inc., Public Library of Science, The Encyclopedia of Life, Open Book Publishers (OBP), PubMed, U.S. National Library of Medicine, National Center for Biotechnology Information, U.S. National Library of Medicine, National Institutes of Health (NIH), U.S. Department of Health & Human Services, and USA.gov, which sources content from all federal, state, local, tribal, and territorial government publication portals (.gov, .mil, .edu). Funding for USA.gov and content contributors is made possible from the U.S. Congress, EGovernment Act of 2002.
Crowd sourced content that is contributed to World Heritage Encyclopedia is peer reviewed and edited by our editorial staff to ensure quality scholarly research articles.
By using this site, you agree to the Terms of Use and Privacy Policy. World Heritage Encyclopedia™ is a registered trademark of the World Public Library Association, a nonprofit organization.