 #jsDisabledContent { display:none; } My Account |  Register |  Help Flag as Inappropriate This article will be permanently flagged as inappropriate and made unaccessible to everyone. Are you certain this article is inappropriate?          Excessive Violence          Sexual Content          Political / Social Email this Article Email Address:

# Bayes factor

Article Id: WHEBN0000824552
Reproduction Date:

 Title: Bayes factor Author: World Heritage Encyclopedia Language: English Subject: Collection: Publisher: World Heritage Encyclopedia Publication Date:

### Bayes factor

In statistics, the use of Bayes factors is a Bayesian alternative to classical hypothesis testing. Bayesian model comparison is a method of model selection based on Bayes factors.

## Contents

• Definition 1
• Interpretation 2
• Example 3
• Notes 5
• References 6

## Definition

The posterior probability Pr(M|D) of a model M given data D is given by Bayes' theorem:

\Pr(M|D) = \frac{\Pr(D|M)\Pr(M)}{\Pr(D)}.

The key data-dependent term Pr(D|M) is a likelihood, and represents the probability that some data are produced under the assumption of this model, M; evaluating it correctly is the key to Bayesian model comparison.

Given a model selection problem in which we have to choose between two models, on the basis of observed data D, the plausibility of the two different models M1 and M2, parametrised by model parameter vectors \theta_1 and \theta_2 is assessed by the Bayes factor K given by

K = \frac{\Pr(D|M_1)}{\Pr(D|M_2)} = \frac{\int \Pr(\theta_1|M_1)\Pr(D|\theta_1,M_1)\,d\theta_1} {\int \Pr(\theta_2|M_2)\Pr(D|\theta_2,M_2)\,d\theta_2} .

If instead of the Bayes factor integral, the likelihood corresponding to the maximum likelihood estimate of the parameter for each model is used, then the test becomes a classical likelihood-ratio test. Unlike a likelihood-ratio test, this Bayesian model comparison does not depend on any single set of parameters, as it integrates over all parameters in each model (with respect to the respective priors). However, an advantage of the use of Bayes factors is that it automatically, and quite naturally, includes a penalty for including too much model structure. It thus guards against overfitting. For models where an explicit version of the likelihood is not available or too costly to evaluate numerically, approximate Bayesian computation can be used for model selection in a Bayesian framework, with the caveat that approximate-Bayesian estimates of Bayes factors are often biased.

Other approaches are:

## Interpretation

A value of K > 1 means that M1 is more strongly supported by the data under consideration than M2. Note that classical hypothesis testing gives one hypothesis (or model) preferred status (the 'null hypothesis'), and only considers evidence against it. Harold Jeffreys gave a scale for interpretation of K:

K dHart bits Strength of evidence
< 100
< 0
negative (supports M2)
100 to 101/2
0 to 5
0 to 1.6
barely worth mentioning
101/2 to 101
5 to 10
1.6 to 3.3
substantial
101 to 103/2
10 to 15
3.3 to 5.0
strong
103/2 to 102
15 to 20
5.0 to 6.6
very strong
> 102
> 20
> 6.6
decisive

The second column gives the corresponding weights of evidence in decihartleys (also known as decibans); bits are added in the third column for clarity. According to I. J. Good a change in a weight of evidence of 1 deciban or 1/3 of a bit (i.e. a change in an odds ratio from evens to about 5:4) is about as finely as humans can reasonably perceive their degree of belief in a hypothesis in everyday use.

An alternative table, widely cited, is provided by Kass and Raftery (1995):

2 ln K K Strength of evidence
0 to 2
1 to 3
not worth more than a bare mention
2 to 6
3 to 20
positive
6 to 10
20 to 150
strong
>10
>150
very strong

The use of Bayes factors or classical hypothesis testing takes place in the context of inference rather than decision-making under uncertainty. That is, we merely wish to find out which hypothesis is true, rather than actually making a decision on the basis of this information. Frequentist statistics draws a strong distinction between these two because classical hypothesis tests are not coherent in the Bayesian sense. Bayesian procedures, including Bayes factors, are coherent, so there is no need to draw such a distinction. Inference is then simply regarded as a special case of decision-making under uncertainty in which the resulting action is to report a value. For decision-making, Bayesian statisticians might use a Bayes factor combined with a prior distribution and a loss function associated with making the wrong choice. In an inference context the loss function would take the form of a scoring rule. Use of a logarithmic score function for example, leads to the expected utility taking the form of the Kullback–Leibler divergence.

## Example

Suppose we have a random variable that produces either a success or a failure. We want to compare a model M1 where the probability of success is q = ½, and another model M2 where q is unknown and we take a prior distribution for q that is uniform on [0,1]. We take a sample of 200, and find 115 successes and 85 failures. The likelihood can be calculated according to the binomial distribution:

.

Thus we have

P(X=115 \mid M_1)={200 \choose 115}\left({1 \over 2}\right)^{200}=0.005956...,\,

but

P(X=115 \mid M_2)=\int_{0}^1{200 \choose 115}q^{115}(1-q)^{85}dq = {1 \over 201} = 0.004975....

The ratio is then 1.197..., which is "barely worth mentioning" even if it points very slightly towards M1.

This is not the same as a classical likelihood-ratio test, which would have found the maximum likelihood estimate for q, namely 115200 = 0.575, whence \textstyle P(X=115 \mid M_2) = = 0.056991 (rather than averaging over all possible q). That gives a likelihood ratio of 0.1045, and so pointing towards M2.

The modern method of relative likelihood takes into account the number of free parameters in the models, unlike the classical likelihood ratio. The relative likelihood method could be applied as follows. Model M1 has 0 parameters, and so its AIC value is 2·0 − 2·ln(0.005956) = 10.2467. Model M2 has 1 parameter, and so its AIC value is 2·1 − 2·ln(0.056991) = 7.7297. Hence M1 is about exp((7.7297 − 10.2467)/2) = 0.284 times as probable as M2 to minimize the information loss. Thus M2 is slightly preferred, but M1 cannot be excluded.

A frequentist hypothesis test of M1 (here considered as a null hypothesis) would have produced a very different result. Such a test says that M1 should be rejected at the 5% significance level, since the probability of getting 115 or more successes from a sample of 200 if q = ½ is 0.0200, and as a two-tailed test of getting a figure as extreme as or more extreme than 115 is 0.0400. Note that 115 is more than two standard deviations away from 100.

M2 is a more complex model than M1 because it has a free parameter which allows it to model the data more closely. The ability of Bayes factors to take this into account is a reason why Bayesian inference has been put forward as a theoretical justification for and generalisation of Occam's razor, reducing Type I errors.